1. 2. 3. material content data sheet sales product name bsc0921ndi issued 14. august 2015 ma# ma001013776 package pg-tison-8-3 weight* 101.66 mg construction element material group substances cas# if applicable weight [mg] average mass [%] sum [%] average mass [ppm] sum [ppm] chip inorganic material silicon 7440-21-3 0.917 0.90 0.90 9020 9020 leadframe inorganic material phosphorus 7723-14-0 0.010 0.01 101 non noble metal zinc 7440-66-6 0.041 0.04 404 non noble metal iron 7439-89-6 0.822 0.81 8082 non noble metal copper 7440-50-8 33.360 32.82 33.68 328161 336748 wire noble metal gold 7440-57-5 0.068 0.07 0.07 667 667 encapsulation organic material carbon black 1333-86-4 0.092 0.09 905 plastics epoxy resin - 4.740 4.66 46626 inorganic material silicondioxide 60676-86-0 41.187 40.50 45.25 405152 452683 leadfinish non noble metal tin 7440-31-5 1.122 1.10 1.10 11035 11035 plating noble metal silver 7440-22-4 0.186 0.18 0.18 1828 1828 solder noble metal silver 7440-22-4 0.036 0.04 353 non noble metal tin 7440-31-5 0.029 0.03 282 non noble metal lead 7439-92-1 1.370 1.35 1.42 13479 14114 heat sink clip inorganic material phosphorus 7723-14-0 0.005 0.01 52 non noble metal zinc 7440-66-6 0.021 0.02 209 non noble metal iron 7439-89-6 0.424 0.42 4174 non noble metal copper 7440-50-8 17.228 16.95 17.40 169470 173905 *deviation < 10% sum in total: 100.00 1000000 important remarks: infineon technologies ag provides full material declaration based on information provided by third parties and has taken and continues to take reasonable steps to provide representative and accurate information. infineon technologies ag and infineon technologies ag suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. all statements are based on our present knowledge, are provided 'as is' and may be subject to change at any time due to technical requirements and development without notification. this product is in compliance with eu directive 2011/65/eu (rohs) and contains pb according rohs exemption 7a, lead in high melting temperature type solders. company infineon technologies ag address 81726 mnchen internet www.infineon.com
|
